Digital Lock

[BangMePlz]

I have a Digital Lock on my 2700 b*v box. While installing a Phone Jack JTag, one of the wires came off from the board, and I am not sure exactly where it came off from.

If someone could post a How-To for it, or schematic or a picture for me, I would really appreciate the help. I received the 2700 with the lock already installed, so that is why I don't know how to do it already.

Thanks for any help anyone can offer.

[Sandman]

I have a Digital Lock on my 2700 b*v box. While installing a Phone Jack JTag, one of the wires came off from the board, and I am not sure exactly where it came off from.

If someone could post a How-To for it, or schematic or a picture for me, I would really appreciate the help. I received the 2700 with the lock already installed, so that is why I don't know how to do it already.

Thanks for any help anyone can offer.

Attached are a couple of pictures that show the lock points on a 2700.
Some digital locks also involve the EEprom chip where pin#7 is lifted off of the mainboard and a wire soldered to the lifted EEprom pin. Those connections are not shown in the pics but may be what you have, depending on what type of lock you have (AR105B/C uses that EEProm connection).

[BangMePlz]

Attached are a couple of pictures that show the lock points on a 2700.
Some digital locks also involve the EEprom chip where pin#7 is lifted off of the mainboard and a wire soldered to the lifted EEprom pin. Those connections are not shown in the pics but may be what you have, depending on what type of lock you have (AR105B/C uses that EEProm connection).

You are a life saver! ... SB16 is where it came off the board. Big time thanks man!

[Sandman]

You are a life saver! ... SB16 is where it came off the board. Big time thanks man!

No problem.
Glad it helped.

:)