Just saying HOWDY!

[dizzydlsh]

I would like to say hello to every one here. I am sortofanewbie, testing atmega and plastic. Im do not understand a lot of this stuff , But I can follow instructions and I learn really fast... Nice to be here and thanks for allowing me to the family. You all seem to be as nice as the place I use to be at....

[Cutter]

I would like to say hello to every one here. I am sortofanewbie, testing atmega and plastic. Im do not understand a lot of this stuff , But I can follow instructions and I learn really fast... Nice to be here and thanks for allowing me to the family. You all seem to be as nice as the place I use to be at....

Welcome to ET dizzyd*sh

[dizzydlsh]

Thank you Cutter.. I have many of them and I try to keep it to just 1 at a time.. My feable mind cant handle a lot at 1 time.

[Gordo]

I would like to say hello to every one here. I am sortofanewbie, testing atmega and plastic. Im do not understand a lot of this stuff , But I can follow instructions and I learn really fast... Nice to be here and thanks for allowing me to the family. You all seem to be as nice as the place I use to be at....


Welcome to ET. It is a very nice site and we all are newbies...LOL...also can not answer your pm as you have it shut off...LOL

[dizzydlsh]

How can I turn it on? Do you know?

[Sandman]

How can I turn it on? Do you know?

In your Profile Settings (User CP) go to Edit Options and under Messaging and Notification put a checkmark next to Enable Private Messages.

BTW, Welcome to ET dizzyd*sh. :G_HAND~11:

[Maverick]

welcome aboard!

to enable pm's, click on 'user CP' at the top left, then click on 'edit options', then you will see all your options for email & pm's etc. scroll down and make sure the box is checked beside 'enable private messaging' and you will be good to go.:Banane08:

[Maverick]

In your Profile Settings (User CP) go to Edit Options and under Messaging and Notification put a checkmark next to Enable Private Messages.

BTW, Welcome to ET dizzyd*sh. :G_HAND~11:

we must have posted at the same time or something...:Banane25:

[Sandman]

Yes, I saw that!

Almost a word for word reply from both of us.

:)

[Clydesdale™]

Welcome to ET dizzydlsh, was good chat'n with you last night!

[mrdssjoe]

Hello everyone. I am new to this forum. I used mess with D*V until the P4/P5 switch. Anyway I got away from it for a while and don't know much about what's been going on. Can anyone help me out. I know there is no fix for D*V but I'd like to get into testing D*SH. What do I need to get? Where can I find it (safely)? How do I get started? I know nothing of D*SH. All I needed before was my Mikobu III and a good 3M. Is D*SH as simple or is it more complicated? Thanks to any who are willing to help me out.

[Cutter]

Hello everyone. I am new to this forum. I used mess with D*V until the P4/P5 switch. Anyway I got away from it for a while and don't know much about what's been going on. Can anyone help me out. I know there is no fix for D*V but I'd like to get into testing D*SH. What do I need to get? Where can I find it (safely)? How do I get started? I know nothing of D*SH. All I needed before was my Mikobu III and a good 3M. Is D*SH as simple or is it more complicated? Thanks to any who are willing to help me out.

Welcome mrdssjoe, I would recommend FTA check out this post of mine when I switched to FTA http://www.extremetesting.tv/forums/showthread.php?t=1995, then do some FTA reading, lots of good reading here...make up your mind which way you want to test and we will help you get up and running.


Cutter

[mrdssjoe]

thanks but I don't understand a thing about FTA and I have more access to D*SH and D*V recievers and everything else. I think it would be easier for me to get into testing D*SH if I just had someone to help me out with telling me what I needed to get to get started and where I can get the files. Is D*SH simillar to D*V as far as files go? I mean are they like 3M's?

[Truck_Driver]

k
for plastic...you have to have a receiver you can Jtag...( read box keys and receiver information ) so you read and write to the receiver...that goes for any type of card
then you need a ISO programmer for Dish
and a was to unlock the card...a 102 or 103 card...that will take a unlocker like a nexus
and you have to make sure your card is not over rev 8, rev 3 is the best for a 102 card
then a dish a dish 500 with a legacy is the best way to go...but if you find a Dish/Pro receiver you can also use a D/P dish 500
or the cheapest way to go is a viewsat receiver..lite is ok..same as a platimum..but without the card holder....it is a FTA receiver..look for a dealer that is a real dealer than a clone dealer
just check the viewsat site and they list them all

[Maverick]

thanks but I don't understand a thing about FTA and I have more access to D*SH and D*V recievers and everything else. I think it would be easier for me to get into testing D*SH if I just had someone to help me out with telling me what I needed to get to get started and where I can get the files. Is D*SH simillar to D*V as far as files go? I mean are they like 3M's?

here is some good info put together by Sandman for 102's. check it out here:

http://www.extremetesting.tv/forums/showthread.php?t=1856

[Cutter]

thanks but I don't understand a thing about FTA and I have more access to D*SH and D*V recievers and everything else. I think it would be easier for me to get into testing D*SH if I just had someone to help me out with telling me what I needed to get to get started and where I can get the files. Is D*SH simillar to D*V as far as files go? I mean are they like 3M's?

FTA is d*sh, its very easy, if you want to get into plastic you need a unlocker and iso programmer plus a 102 card... its going to cost a lot more than buying a FTA receiver, and you don't have to worry about looping a card, you could try emu. the choice is yours. I lot of ppl here test with FTA... to me its the easiest way to get started, you can buy a FTA ird and be up for less than $150.



Cutter

[Clydesdale™]

Hello everyone. I am new to this forum. I used mess with D*V until the P4/P5 switch. Anyway I got away from it for a while and don't know much about what's been going on. Can anyone help me out. I know there is no fix for D*V but I'd like to get into testing D*SH. What do I need to get? Where can I find it (safely)? How do I get started? I know nothing of D*SH. All I needed before was my Mikobu III and a good 3M. Is D*SH as simple or is it more complicated? Thanks to any who are willing to help me out.

Welcome to Extreme mrdssjoe. People here are great and very helpfull but you're asking for help in the wrong section plus you hijacked somebody elses thread. :arsespank: hehehehe :Banane25: . but have a beer anyways :beer: :Banane08:
No doubt you'll like it here; check out the arcades too if you're board :G_HAND~11:

[SSDA67]

Welcome MrDSSJoe And DizzyDish(we've already Spoke)...

WELCOME!


Need anything holler!

SSDA67

[harley2000]

hi everyone i am a newbie and was on another site went to vote and saw that this site was # one had to check it out . Seems really friendly glad I joined. :bananajump:

[Total]

hi everyone i am a newbie and was on another site went to vote and saw that this site was # one had to check it out . Seems really friendly glad I joined. :bananajump:


We all were newbie at one time , at ET we help newbies and experts in the same way , nicely ... Thanks for joining :)
:thankyou:

[Cutter]

hi everyone i am a newbie and was on another site went to vote and saw that this site was # one had to check it out . Seems really friendly glad I joined. :bananajump:

Welcome to ET..This is a friendly site, and I'm glad you joined too







Cutter

[Maverick]

hi everyone i am a newbie and was on another site went to vote and saw that this site was # one had to check it out . Seems really friendly glad I joined. :bananajump:

welcome aboard! no matter what the question dont be afraid to ask for help. everyone here is helpful and friendly. :hatsoff:

[SSDA67]

Welcome Harley2000!

Need anything Holler one of us will come runnin...

SSDA67:spider304: :bananalama:

[Sandman]

hi everyone i am a newbie and was on another site went to vote and saw that this site was # one had to check it out . Seems really friendly glad I joined. :bananajump:

Welcome to ET harley2000.
Glad you stopped by.

:G_HAND~11:

[Clydesdale™]

Welcom to Extreme harley2000.... have fun bro!:Banane53: :bananajump: :Banane25: